Open main menu menu
close

WAL

    WIGUNA ARTHA LESTARI COMPANY 2019

    WAL Products

    Products

    < Back to Product Categories
    • ALLOY SCREW PIN SHACKLES G-209A
    zoom
    < Back to Product Categories
    ALLOY SCREW PIN SHACKLES G-209A

    Crosby - Shackle G-209A are used in Pick and Place applications (move a load and place as required. Tighten screw pin before each pick). For permanent or long-term installations, Crosby recommends the use of bolt type shackles. Screw pin shackles can be used for applications involving side-loading circumstances. Reduced working load limits are required for side-loading applications. While in service, do not allow the screw pin to be rotated by a live line, such as a choker application.

    Product Details

    • Forged alloy steel, Quenched & Tempered, with alloy pins.
    • Meets performance requirements of Grade 8 shackles.
    • Working Load Limit permanently shown on every shackle.
    • Hot-dip galvanized.
    • Size 3/8 inch is mechanically galvanized.
    • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
    • Approved for use at -40° C (-40° F) to 204° C (400° F).
    • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
    • G-209A Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 2, except for those provisions required of the contractor.

     

    For more information contact us

    Specification

    Specification

    zoom

    PLEASE FILL PRODUCT QUESTIONAIRE FORM FOR DETAILS



    * form must be filled

    whatsapp